Pakket: openocd (0.0+r211-1) [universe]
Verwijzigingen voor openocd
Ubuntu bronnen:
Het bronpakket openocd downloaden:
Beheerder:
Please consider filing a bug or asking a question via Launchpad before contacting the maintainer directly.
Original Maintainer (usually from Debian):
- Uwe Hermann
It should generally not be necessary for users to contact the original maintainer.
Vergelijkbare pakketten:
Open on-chip JTAG debug solution for ARM7 and ARM9 systems
OpenOCD is an on-chip debugging, in-system programming and boundary-scan testing tool for ARM systems.
The debugger uses an IEEE 1149-1 compliant JTAG TAP bus master to access on-chip debug functionality available on ARM7 and ARM9 based microcontrollers / system-on-chip solutions.
User interaction is realized through a telnet command line interface and a gdb (the GNU debugger) remote protocol server.
OpenOCD supports various different types of JTAG interfaces/programmers:
* Parallel port wigglers * Macraigor Wiggler JTAG cable * Gateworks GW16012 JTAG programmer * Xilinx DLC5 JTAG parallel cable III * Ka-Ro TRITON starterkit II JTAG cable * Lattice parallel port JTAG cable * ST FlashLINK programming cable * Wiggler 2 cable (basically a wiggler with an LED) * Amontec JTAG Accelerator * USBJTAG * OOCD-Link * Amontec JTAGkey * Amontec JTAGkey-Tiny * Olimex ARM-USB-OCD * eVerve Signalyzer * TinCanTools Flyswatter * Turtelizer 2 * Hitex STR9-comSTICK * Luminary Micro evb_lm3s811 * ASIX PRESTO * usbprog * Altium universal JTAG cable
It also supports a number of different ARM cores:
* ARM7TDMI(-s) * ARM9TDMI * ARM920t * ARM922t * ARM926ej-s * ARM966e * Cortex-M3
Support for Intel XScale CPUs in also included:
* PXA25x * PXA27x * IXP42x
Andere aan openocd gerelateerde pakketten
|
|
|
-
- dep: libc6 (>= 2.6.1-1)
- GNU C Bibliotheek: Gedeelde bibliotheken
Ook een virtueel pakket geboden door: libc6-udeb
-
- dep: libftdi0 (>= 0.10)
- Library to control and program the FTDI USB controller
-
- dep: libusb-0.1-4 (>= 2:0.1.12)
- userspace USB programming library